Stainless Steel Flux Cored Wire E385t1-1

• Type: Flux-cored Wire
• Material: Stainless Steel
• Flux Containing: Containing Flux
• Extended Length: >20mm
• Transport Package: Spool
• Trademark: TY
• Model NO.: AWS A5.22 E385T1-1

Product Description

Instructions:
1. Use a windproof barrier when welding in windy places to avoid the occurrence of pores when the wind is strong.
2. The temperature between the channels is controlled at 16-100 °C.
3. The moisture, rust and oil on the surface of the base metal before welding should be fully removed.
4. Using CO₂ gas welding, the purity is greater than 99.8%, and the gas flow rate is controlled at 20-25L/min.
5. The dry elongation of the wire should be controlled within the range of 15-25mm.
6. After the wire is unpacked, it should be noted: To take moisture-proof measures, use up as soon as possible, and do not expose the unused wire to the air for a long time.

Chemical compostiton of deposited metal (shield gas:CO₂)

C	Mn	Si	Cr	Ni	Mo	P	S	Cu
0.012	1.22	0.03	19.95	24.50	4.77	0.01	0.01	1.54

Mechanical properties of deposited metal (shield gas:CO₂)

Yield Strength	Tensile Strength	Elongation	Impact Value
Mpa(σb)	Mpa(σb)	%(δ5)	-40ºC(J)
-	605	35	-

 

Sizes available and recommended currents(DC-EP)

Diameter(mm)	1.2	1.6
Voltage (V)	22-34	25-38
Current (A)	120-160	200-300
Elongation (mm)	15-20	15-18
Gas Flow	20-25	20-25

Package