Stainless Steel Flux Cored Wire Aws A5.22 E308lt1-1

• Type: Flux-cored Wire
• Material: Stainless Steel
• Flux Containing: Containing Flux
• Slag Characteristic: Acidic
• Extended Length: 10-20mm
• Transport Package: Carton
• Model NO.: AWS A5.22 E308LT1-1
• Specification: 1.2mm
• Trademark: Tianyu
• Origin: China

Product Description

Introduction & Characteristics:
FRW-308L is a rutile type flux cored wire for low carbon 18%Cr-8%Ni Stainless steel. It is used for all position welding to be used with CO₂or Argon + CO₂ mixed shielding gases.This wire benefits from a fast freezing slag system which assist the operator when welding out of position and performs equally as well when welding in the flat and horizbontal position. 

Instructions:
1.The oil stains and rust on the weldments should be cleared away.
2. Designed for welding with CO₂ or Argon + CO₂ mixed shielding gases 
3. When welding, the gas flow rate is generally 20~25L/min.


Chemical compostiton of deposited metal (shield gas:CO₂)

C	Mn	Si	P	S	Ni	Cr
0.03	1.42	0.42	0.027	0.004	9.81	19.83

Mechanical properties of deposited metal (shield gas:CO₂

Yield Strength	Elongation	Impact Value
Mpa(σb)	%(δ5)	0ºC(J)
570	43	41

Sizes available and recommended currents(DC-EP)

Diameter(mm)		0.9	1.2	1.6
Current(A)	F,HF	130-180	180-220	250-290
	V-up OH	100-140	120-160	220-270

Package

Dia(mm)	1.2	1.4	1.6
Spool(kg)/(lbs)	5,12.5,15,20/11,28,33